|
Hello Saundra,
Thread on the reel pin, make sure the presser foot is up and make sure the takeup lever is at the top, take the thread to the left and over the top guide right above the tension, bring the thread down the right hand side to the tension, round the tension and back up the left hand side make sure you pull the spring up with the thread, up to the takeup lever thread the takeup lever right to left, follow the guides all the way down to the needle, if the bobbin case faces towards you thread the needle front to back, if the bobbin case is on the side thread the needle left to right.
drivewithken April 2010 |
|