Emv are inside the pressed steel pan on side of the gearbox facing the front of the car , put a container under after you have drains it ,the valves are on top of the valve body on their own the other valves are in a row next to each other ,after you put the new valves in you will need to have the software upgraded at a transmission shop that has the CLIP unit ,or go to Renault and get ripped off there .
The best free tip you will ever get is to USE FULLY SYNTHETIC ONLY DONT USE DEXTRON 2 OR 3 ,and put some extra magnets around the pan
And change the fluid every 30,000 miles if you are going to keep the thing !
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.