re-dismantle late type 2-stroke crankshaft- Victa?

yeah i totally agree jason and best of luck william mate. i was also wondering how to get all the grit of the main engine components i have tried de-greaser and all other stuff but still it's pretty hard any ideas???

richard cheese
August 2008

Its william and having just dismantled my first victa i can now see what you mean as regards the crank. Sorry for the duff information i gave you but its the first time i have seen anything like it in my life. Glad you got sorted anyway

william
February 2008

the late modle victa engines are very easy to rebuild there are two types of crank pins one with two flat sides and one with four pin holes ,you need a tool to remove and a rattle gun but i have removed them before with a punch, they are all right hand thread. if you leave the head on and put some rope in the spark plug hole that will stop the piston from moving while you hit the crank pin note;when you put it back together the pins on the piston for the ring location faces toward the inlet.there are two main bearings the bottom one having a seal if you are replacing them you need a press,but you need the disc boss of first put a hammer on one side of the boss and hit the other side with a hammer that will shock the boss off the flywheel, best of luck jason. w.

jason
December 2007