Yup, definitely sound like the bearings have gone. Strange, though, on such a new machine. Could happen if you've been putting too much in and overloading it. Generally, the bearings are fairly straightforward to replace...check on this site to see if there's a 'how to do it' answer. There is for most machines. You do need a fairly good selection of tools to do the job. The old bearings need a fair bit of forcing out and the same with forcing the new ones in. The machine needs some dismantling first but don't let this put you off. They're all fairly easy, but do label the wires if you have to disconnect any Can't help, though, with a source for the bearing kit. Call the manufacturer's number on your literature and they will help. I would suggest around ÂŁ35/40 for the kit. BUT when you speak to the manufacturer, try suggesting to them that it's a little sonn for the bearings to be going. Although the machine's out of warranty, it doesn't necessarily mean they won't replace the bearings free of charge. Give it a try and the best of luck!
Denis Langley (flatcat15)
June 2005
howtomendit.com for free repair help, information and advice.
