How can I install roller for kenmore 116 36923502?
I need to reinstall the roller for vacuum but their is a brown wire and blue wire that needs to be attached. I just need to know which wire is negative and which is postive.
It will matter on this model. The brush roller motor is a DC type. The schematic for this model does not indicate wire colors. From experience of working on these vacs, I do remember the wires being a specific length to reach the terminals they need to be on. If you happen to connect it wrong, damage will not be done. The brush will only spin the wrong way. The most certain way to check your work is to momentarily run the vac face down, with the bottom of the base facing upward, before putting it all back together. This is to ensure that the brush roller is running in the forward motion. Of course, you are doing this at your own risk.
If it is an AC motor, it doesn't matter which wire goes where. If it is DC it does. I just looked at the schematic for your model but it doesn't have a wiring diagram. Sorry mate!
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.