How can I remove the cover of my Miralec supreme 8.3 shower?
There is a water drip from my Miralec supreme 8.3kw shower, my problem is, there isn't a screw holding the cover on.
How do I remove the cover, without breaking it (I presume there are small push clips fitted to the back of the cover)
Any help appreciated thanks
Yes, this is right. You can easily pull off the bottom power knob. Unscrew the screw, the top knob is very tight but does pop off. Lift the case out and upward slightly.
I think from memory that the cover screw is located behind the control knob so if you pull it off you'll see the screw. It might be a fruitless exercise though as parts for the Miralec series became obsolete in the early 90's. Better off replacing with a new Mira Advance.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.