The plastic washer part of the blade lock clamp which slides on a semicircular track has broken into many parts, the helpline says they do not stock this item. can you help me to get one or can you give me the accurate size and specification so that I could make one out of aluminium or something stronger than plastic. without it the saw is unuseable.
Thank you
the saw blade on my table saw clm15ootss stops when i try to cut any wood, there is a rubber belt that turns the motor. how can i ajust the belt to get it to work again, cutting wood.
the instruction book does not tell you how to do this, doin,t know why ?
can any one help with this problem !
Ron, On the same model of table saw I broke the kerf plate or table insert which is an orange plastic plate on each side of the blade and which is flush with the cutting platform. This makes it unusable.
If you were disposing of an old similar saw I would very much like to hear from you.
Terry I think I may have the part you need. I've just scrapped a saw as I couldn't get a motor but I kept the rip fence and I think the plastic part you're talking about is part of this. Ron
Terry if you still need this part let me know. I've just scrapped a saw (motor bust and can't get one). Happy to let you have the part you need for cost of postage. I think I know the part you need as I managed to get one a couple of years ago.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.