I have a triton martenique shower, it is 4 years old but I have onlyjust installed it. I power the shower on and the shower will immediately run, the controls do not work.
I take off the front panel disconnect the ribbon cable to the PCB and replace, the shower then seems to work, but then goes off after a number of seconds, goes cold then off. The water pressure seems to be fine, but the hot button just keeps going off and the shower then stops.
Any help with this problem would be really welcome, as having a real run of problems at the moment and this is just one of many, thanks
Paul
mostlikely wrongly installed or its faulty any way give up DIY, it seems you dont know the difference between showers and shavers and that can be dangerous miss- reading instructions.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.