if it's a top loader unplug from the wall and turn off the water remove the back cover and have a look to see if you can see where the water is coming from.use a nice bright torch. could be a couple of things if machine is old the seal could have gone under the tub or hopefullt just a cracked water pump hose or loose clamp at the bottom of the drain water hose....if stillnot sure dry the floor and pour bucket of water inti the tub and check again....if not dripping empty the water and check again (you obviously need the power back on so be careful......)...if the hose is cracked etc get the model number and call around for spare parts....if it's the seal...big job, but not impossibe again parts required....and if your'e very lucky it,s just the clamp disturbed on the water drain pipe......good luck.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.