How do I remomve the bottom ,what kind of screw driver do I need to get this coffee maker apart ? up from the bottom there is a 2 screws that I can not remove. The coffee maker is not getting power. I want to check the thermal link
you're not alone, after 13 months, my is dead, also.
with so many people on the internet, cuisinart has to be4 aware....not sure what they'll do, but?? good to know that i've founf at least 3 other people with same thing.
I found that they fasten on the base with Torx Security screws -- Like Torx only with a pin in the middle. Tools for this seem rare but I found it. Size is T10. I ordered this tool from Wiha tools at http://www.wihatools.com/284torx.htm
I used their Drive-Loc VI handle and the adjustable long reversible ened "blade". You'll see it on the site.
I get no power to the console. Now that I have it open I do not find the problem.... circuit board? I hate to just add to the enviroment so much material as throwaway when it may be just a screw or wire.
Good luck.
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.