my partner has "fixed the washing machine" it is still in the middle of the room after 3 weeks, he cant get the rubber seal back in, any help will do.
its a whirlpool aa 1400
Hi, if you still need an answer...
Place the large metal ring in through the top of the machine, place the door boot (seal) over the drum, tightern the screw on the metal ring, (ensuring the door boot is seated correctly).
Fit the front of the door boot seal to the front of the machine. Pull the thin wire really tight as you fit it around the front. Place the white plastic cap on the ends of the thin wire, squeeze together with a pair of pliers, Job Done.
Hope this helps.
Simon
Information posted by users should be considered for general guidance only. Users act, or refrain from action, on the basis of such information entirely at their own risk.
fixed4free.com does not endorse any of the information supplied on this website by users.